Tektronix DPO2012 Programmer's Manual

Command Groups
Table 2-27: Miscellaneous Commands (cont.)
Command
Description
LOCk Sets or returns the front panel lock state
*LRN? Returns a listing of o sc ill oscope settings
MESSage Sets or queries message parameters
NEWpass
Changes the password for user protected
data
PASSWord Enables the *PUD and NEWpass set
commands
REM
Specifies a comment, which is ignored by
the oscilloscope
SET? Returns a li sting of oscilloscope settings
TEKSecure Initializes both waveform and setup
memories
TIME
Sets or returns the time displayed by the
oscilloscope
TOTaluptime? Returns the total number of hours that the
oscilloscope has been turned on since the
nonvolatile memory was last programmed
*TRG Performs the group execute trigger (GET)
*TST? Tests the interface and returns the status
UNLock
Unlocks front panel
USBTMC Returns the USBTMC information
USBTMC:PRO DU CTID:DECimal? Returns the product ID in decimal format
USBTMC:PRODUCTID:HEXadecimal? Returns the product ID in hexadecimal format
USBTMC:SERIALnumber?
Returns the instrument serial number
USBTMC:VENDORID:DECimal? Returns the vendor ID in decimal format
USBTMC:VENDORID:HEXadecimal? Returns the vendor ID in hexadecimal format
VERBose
Sets or returns the verbose state
PictBridge Command Group
Use the commands in the PictBridge to store the printer settings.
Table 2-28: PictBridge Commands
Command
Description
PICTBridge:DATEP rint
Enables or disables printing the date on the
print output
PICTBridge:DEFault Sets the arguments for all PictBridge
commands to their default values
2-30 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English