Commands Listed in Alphabetical Order
Syntax
TIME <Q String>
TIME?
Related Commands
DATE
Arguments
<QString> is a time in the form "hh:mm:ss" where hh refers to a two-digit h our
number, mm refers to a two-digit minute number from 00 to 59, and ss refers to a
two-digit second number from 00 to 59.
Examples
TIME "14:0 0:00" sets the time to exactly 2:00 p.m.
TIME? might return :TIME "14:05:17” indicating that the current time is set
to 2:05 p.m. and 17 seconds.
TOTaluptime? (Query Only)
This command returns the total number of hours that the o scilloscope h as been
powered on since the nonvolatile memory was last programmed (usually since the
initial manufacturing process).
Group
Miscellaneous
Syntax
TOTaluptime?
*TRG (No Query Form)
Performs a group execute trigger on commands de finedby*DDT.
Group
Miscellaneous
Syntax
*TRG
Related Commands
*DDT
Examples
*TRG immediately executes a ll commands that have been definedby*DDT.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-293
To Next Page
Loading...
Need help?
General
