Tektronix DPO2012 Programmer's Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO2AUTO application module.
Group
Bus
Syntax
BUS:B<x>:LIN:SAMPLEpoint <NR1>
BUS:B<x>:LIN:SAMPLEpoint?
Arguments
<NR1> is the sample point (in % ) at which to sample during each bit period.
Examples
BUS:B1:LIN:SAMPLEPOINT 10 sets the sample point is at 10% of the bit period
BUS:B1:LIN:SAMPLEPOINT? might return BUS:B1:LIN:SAMPLEP OINT 50
indicating that the sample point is at 50% of the bit period
BUS:B<x>:LIN:SOUrce
Sets or returns the LIN data source.
Conditions
This command requires a DPO2AUTO applic ation module.
Group
Bus
Syntax
BUS:B<x>:LIN:SOUrce {CH1|CH2|CH3|CH 4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:LIN:SOUrce?
Arguments
CH<x> specifies the LIN source chan
nel where x is 1 to 4.
D<x> specifies the LIN source channel where x is 0 to 15.
Examples
BUS:B1:LIN:SOURCE CH4 sets the LIN source to channel 4 .
BUS:B1:LIN:SOURCE? might return BUS:B1:LIN:SOURCE CH1 indicating that
the LIN source is channel 1.
BUS:B<x>:LIN:STANDard
Sets or returns the LIN standard.
Conditions
This command requires a DPO2AUTO applic ation module.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-79

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English