Commands Listed in Alphabetical Order
SAVe:WAVEfor
m(NoQueryForm)
This command saves a specified waveform or all displayed waveforms (excluding
serial bus waveforms). Only individual analog waveforms (CH<x>, MATH and
REF<x>) can b
e saved to reference memory locations.
You can save all displayed waveforms, excluding serial bus w aveforms, to a
single CSV fi
le when the
SAVE:WAVEFORM:FILEFORMAT is set to SPREADSHEET.
You can save all displayed waveforms, excluding serial bus
waveforms
to consecutive ISF (internal save format) files when the
SAVE:WAVEFORM:FILEFORMAT is set to INTERNAL.
NOTE. For MSO models, reduced resolution waveform data is not available for
the digital channels.
Group
Save and Recall
Syntax
SAVe:WAVEf
orm[<wfm>,{REF<x>}] | [<wfm>, <QString>] | [ALL,
<QString>]
Related Commands
RECAll:WAVEform, SAVe:WAVEform:FILEFormat
Arguments
<wfm>, <REF<x>> saves the specified waveform to the specified reference
memory location. <wfm> can be any live analog channel (where <x> is the
channel number), the MATH1 waveform, or another refer ence waveform (such
as REF1).
<wfm>, <QString> saves the specified waveform to the file specified in the
quoted string argument. Any live channel (such as CH1), the MATH1 waveform,
any reference waveform can be saved to a file.
ALL, <Q String> saves all displayed waveforms, excluding serial bus
waveforms, to a single CSV file specified by the quoted string argument when the
SAVE:WAVEFORM:FILEFORMAT is set to SPREADS HEET, or saves all displayed
waveforms, excluding serial bus waveforms to individual ISF (internal save
format) files with a file name prefixspecified by the argument with an underscore
(_) and the waveform ID (such as CH1, REF1, MATH) appended to the file
name(s).
Examples
SAVE:WAVEFORM CH1,REF1 saves the CH1 waveform in reference memory
location 1.
2-238 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
