Commands Listed in Alphabetical Order
Examples
MESSage:SHOW “
Hello World”
displays “Hello world” in the upper left corner of the box (you can define the box
size with the MESSAGE BOX command).
MESSage:SHOW “Í@Hello WorldÍ@ ... hello”
displays “Hello world ... hello” in the upper left corner of the box and the word
“world” is displayed in inverse video. In this example, Í stands for the escape
character. The escape character may appear differently for you depending on
your controller program.
MESSage:STATE
Controls the display of the message window on the screen.
Group
Display
Syntax
MESSage:STATE {OFF|ON|<NR1>}
MESSage:STATE?
Related Commands
MESSage:BOX
MESSage:SHOW, MESSage:CLEAR
Arguments
OFF or <NR1> = 0 removes the message window from the screen.
ON or <NR1> ≠ 0 displays the message window and its contents on the screen.
NEWpass (No Query Form)
This command changes the password that e nables access to password protected
data. The PASSWord command must be successfully executed before using this
command or an execution error will be generated.
Group
Miscellaneous
Syntax
NEWpass <QString>
Related Commands
*PUD
PASSWord
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-219
To Next Page
Loading...
Need help?
General
