Acquire the Signal
2. If you change your mind, push Undo Default
Setup to undo the last default setup.
Undo
Default
Setup
Using Autoset
Autoset adjusts the instrument (acquisition, horizontal, trigger, and vertical controls) such that it displays four or five waveform
cycles for a nalog channels with the trigg er near the midlevel, and ten cycles for digital channels.
Autoset works with both the analog and digital channels.
1. Connect the analog probe, and then select
the input channel. (See p age 76, Setting Up
Analog Channels.)
2. Push Autoset to execute an Autoset.
84 DPO3000 Series Oscilloscopes User Ma nual
To Next Page
Loading...
Need help?
General
