Installation
Acquisition System: 1 MΩ
The maximum input voltage at the BNC, between center conductor and shield is 400 V
pk
(DF ≤ 39.2%), 250 V
RMS
to 130 kHz
derated to 2.6 V
RMS
at 500 MHz.
The maximum transient withstand voltage is ± 800 V
pk
.
For steady-st ate sinuso idal waveforms, derate at 20 dB/d ecade above 200 kHz to 13 V
pk
at 3 MHz and above.
Acquisition S ystem: 50 Ω
The maximum input v olta ge at the BNC, between cente r conductor and shield is 5 V
RMS
,withpeaks≤ ±20 V (DF ≤ 6.25% )
Acquisition S ystem: Digital Inputs
The maximum input voltage at the inp ut for the logic probe is ±15 V peak.
Aux In: 1 M Ω
The maximum input voltage at the BNC, between ce nter conductor and shield is 400 V
pk
(DF ≤ 39.2%), 250 V
RMS
to 2 MHz
derated to 5 V
RMS
at 500 M Hz.
The maximum transient withstand voltage is ±800 V
pk
.
For steady-st ate sinoso idal waveforms, derate at 20 dB/d ecade above 200 kHz to 13 V
pk
at 3 MHz and above.
CAUTION. To e nsure proper cooling, keep the sides and rear of the instrume nt clear of obstructions.
10 MSO4000 and DPO4000 S eries Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
