Preface
1 GHz bandwidth and 5 GS/s (10 GS/s optional) real time sampling rate on all channels, 20 GS/s (40 GS/s optional)
on 1 channel, DP
O7104
500 MHz bandwidth and 5 G S/s real time sampling r ate on all channels, 20 GS/s on 1 channel, DP O 7054
2 GHz bandwidth and 10 GS/s real time sampling rate on 2 analog channels, MSO5204 and DPO5204
1 GHz bandwidth and 10 GS/s real time sampling rate on 2 analog channels, MSO5104 and DPO5104
500 MHz bandwidth and 5 GS/s real time sampling rate on all analog channels, MSO5054 and DPO5054
350 MHz bandwidth and 5 GS/s real time sampling rate on all analog channels, MSO5034 and DPO5034
Enhanced Bandwidth capability that, when enabled, applies Digital Signal Processing (DSP) filters that can extend the
bandwidth and flatten the passband. Enhanced Bandwidth provides a matched response across enabled channels when
they are at maximum sample rate. You can limit the bandwidth down to 500 MHz to optimize the signal to noise ratio.
Enhanced bandwidth is extended to the probe tip for some high performance probes and tips.
Record lengths up to 500,000,000 samples, depending on model and option
Up to 1.0% DC vertical gain accuracy, depending on model
Four analog input channels (each with 8-bit resolution when not in Hi-Res mode), auxiliary trigger input and output
Sixteen digital channels available on MSO70000/C and MSO5000 Series instruments with an additional clock c hannel
available on the MSO70000/C
iCapture allows analyzing the analog characteristics of the digital channels on MSO70000/C Series instruments
Sample, envelope, peak-detect, high-resolution, waveform database, average, and FastAcq acquisition modes
Full programmability, with an extensive GPIB-command set and a message-based interface
PinPoint triggering with flexible A and B tr
igger events and logic qualified triggers available on MSO70000/C,
DSA70000B/C, DPO70000B/C, and DPO7000/C
Complete set of triggers available on MSO5000 and DPO5000 Series instruments
Selectable trigger position c orrection to m ore accurately place the trigger and reduce jitter.
Serial triggering on industry standards, serial pattern triggering, and pattern lock triggering are available on some
models or options.
Parallel trigger available on MSO70000/C and MSO5000 Series instruments.
Powerful built-in m easurement capability, including histograms, automatic measurements, eye pattern measurements
and measurement statistics
Mathematically combine waveforms to create w avef orms that support your data-analysis task. Use arbitrary filters in
math equations. Use spectral analysis to analyze waveforms in the frequency domain.
A large 12.1 inch ( 307.3 mm) [10.4 i nch (264 mm) MSO5000 and DPO 5000] high resolution XGA c olor display that
supports color grading of waveform data to show sampl
e density. Display 10 divisions both horizontally and vertically.
Wave Inspector controls for managing long record length, with zoom and pan, play and pause, and search and mark
available on MSO 5000 and DPO5000
MagniVu 60.6 ps resolution, high-speed digital sampling rate on MSO5000
MultiView Zoom to v iew and compare up to four zoom areas at a time. Lock and manually or automatically scroll up to
four zoom areas. You can control the visibility of waveforms inside the zoom window
Automatically search and mark events of interest on your waveform
MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DP O5000 Series User Manual xiii
To Next Page
Loading...
Need help?
General
