Appendix C
Avoid electric overload. To avoid injury or fire hazard, do not apply potential to any input, including the reference inputs,
that varies fro
m ground by more than the maximum rating for that input.
Avoid exposed circuitry and do not operate without covers. Do not touch exposed connections and components
when power is present.
Inspect the probe and accessories. Before each use, inspect probe and accessories for damage (cuts, tears, defects
in the probe body, accessories, cable jacket, etc.). Do not use if damaged.
Do not operate in Wet/Damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Safety terms and symbols terms in this manual.
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could r esult in damage to this product or other property.
Symbols on the product. These symbols may appear on the product:
Contacting Tektronix
Web site: www.tektronix.com
Phone: 1-800-833-9200
Address: Tektronix, Inc.
Department or name (if known)
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
Email:
techsupport@tektronix.com
Warranty information
For warranty information, go to www.tektronix.com/warranty
186 MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO 5000B Series U ser M anual
To Next Page
Loading...
Need help?
General
