Safety compliance
This section lists the safety standards with which the product complies and other safety compliance information.
EU low voltage directive
Compliance was demonstrated to the following specification as listed in the Official Journal of the European Union:
Low Voltage Directive 2014/35/EU.
■
EN 61010-1; EN 61010-2-030
U.S. nationally recognized testing laboratory listing
■
UL 61010-1; UL 61010-2-030
Canadian certification
■
CAN/CSA-C22.2 No. 61010-1; 61010-2-030
Additional compliances
■
IEC 61010-1; IEC 61010-2-030
Equipment type
Test and measuring equipment.
Safety class
Class 1 – grounded product.
Pollution degree rating
Pollution Degree 2 (as defined in IEC 61010-1). Rated for indoor, dry location use only.
Measurement and overvoltage category description
Measurement terminals on this product may be rated for measuring mains voltages from the following category (see specific
ratings marked on the product and in the manual).
■
Category II. Circuits directly connected to the building wiring at utilization points (socket outlets and similar points).
NOTE. Only mains power supply circuits have an overvoltage category rating. Only measurement circuits have a measurement
category rating. Other circuits within the product do not have either rating.
Mains overvoltage category rating
The mains power supply circuit for this product is rated for overvoltage category II (as defined in IEC 61010-1).
EMC, safety and environmental compliance
54 MSO54, MSO56, MSO58 Installation and Safety Manual
To Next Page
Loading...
Need help?
General
