Operator Information
P6021 Instruction Manual
3
Your P6021 is shipped with the following accessories:
H
This instruction manual — Read these instructions to familiarize yourself
with the features, specifications, and operation of the P6021 current probe.
H
6-inch ground lead — Use the 6-inch ground lead to ground the shield
around the probe transformer at the probe end of the cable. This allows you
to move the ground connection closer to the circuit that you are measuring,
thereby improving high frequency response. The ground lead clips onto the
ground connector on the bottom of the probe as shown.
Please refer to the parts list in the section entitled Replaceable Mechanical Parts
for part numbers.
Your P6021 may be used with the following optional accessory:
H
CT-4 Current Probe — The CT-4 is a robust clip-on transformer that
extends the current range of the P6021 up to 1000 amps (provided the
amp-second rating is not exceeded). The CT-4 has receptacles for current
probes in either 20:1 or 1000:1 step-down ratios.
Using the Standard
Accessories
Optional Accessories
To Next Page
Loading...
Need help?
General
