Tektronix T922 User Manual

Mounting Procedure
Operating
Instructions-T921/T922/T922R
The hardware
needed to mount the slide-out tracks
is
shown in the illustrations
at the end of this section . Since
the hardware supplied
is intended to make the tracks
compatible with a variety of cabinet
racks and installation
methods, not all of it will be needed for this
installation .
Use only the hardware
that is required for the mounting
method used .
Refer
to
the
illustrations at the end of this section for
recommended mounting procedures .
Removing or Installing the
Instrument
After inital installation and adjustment of the slide-out
tracks, the T922R can be removed or installed
without
further adjustments under normal conditions .
Slide-Out Track Lubrication
The slide-out tracks normally require no
lubrication .
The special finish on the sliding surfaces
provides perma-
nent lubrication
.
However, if the
tracks do not slide
smoothly even after proper
adjustment, a thin coating of
paraffin rubbed onto
the sliding surfaces may improve
operation .

Tektronix T922 Specifications

General

Brand	Tektronix
Model	T922
Category	Test Equipment
Language	English