Tektronix TDS200 Series User Manual

TDS1000/2000-Series Digital Oscilloscope User Manual
169
Appendix B: Accessories
All accessories (standard and optional) are available by contacting
your local Tektronix fie ld office.
Standard Accessories
P2200 1X, 10X Passive Probes. The P2200 passive probes
havea6MHzbandwidth with a rating of 150 V CAT II when the
switch is in the 1X position, and a 200 MHz bandw idth with a
rating of 300 V CAT II when the switch is in the 10X position.
A probe instructions manual is included.
TDS1000- and TDS2000-Series Oscilloscope User Manual.
A single user manual is included. Refer to the Optional
Accessories for a complete list of available language manuals.
Optional Accessories
TDS2CMA Communications Extension Module. The
TDS2CMA Communications module plugs directly into the rear
panel of any TDS1000- or TDS2000-Series oscilloscope. This
module provides full GPIB and RS-232 compatibility and a
Centronics port for printing screen data.
RM2000 Rackmount Kit. The RM2000 Rackmount Kit lets you
install a TDS1000- or TDS2000-Series oscilloscope into an
industry-standard 19 inch rack. The rackmount kit requires seven
inches of vertical rack space. You can turn the oscilloscope power
on or off from the front of the rackmount kit. The rackmount kit
does not have slide-out capability.

Tektronix TDS200 Series Specifications

General

Brand	Tektronix
Model	TDS200 Series
Category	Test Equipment
Language	English