Save/Recall
TDS3000B Serie s User Manual
3-51
Saving a Waveform to Reference Memory. Tosaveawaveformto
nonvolatile memory, first select the waveform you want to save.
Push the Save Wfm screen butt on and then select one of the four
reference waveform locations. See page 3--86 for an alte rnate
method you can use to save waveforms.
Saved waveforms contain only the most current acquisition;
gray-scale information, if any, is not saved.
Displaying a Reference Waveform. To display a waveform stored in
nonvolatile memory, push the REF button and then push the Ref1,
Ref2, Ref3, or Ref4 screen button.
When a reference waveform is selected, it appears brighter than
other reference waveforms. Reference waveforms do not c onta in
gray-scale information.
To Next Page
Loading...
Need help?
General
