Appendix G: Ethernet Set up
TDS3000B Serie s User Manual
G-5
Testing Your Ethernet Connection
The following text describes how to te st the Ethernet conne ction,
network printing, and the e*Scope feature. You must already have
entered the oscilloscope Ethernet network and printer settings before
doing these tests.
Testing the Oscilloscope Connection
To te st your oscilloscope’s Ethernet connection, do the following
steps:
1. Push the UTILITY front panel button.
2. Push the System bottom button to select I/O.
3. Push the Ethernet Network Settings bottom button to display
the Network Confi guration side menu.
4. Push the Test Connection side button. If the connect ion is good,
the side menu displays OK. If you do not see OK,gotopage
G--7 for troubleshooting suggesti ons.
Testing Network Printing
To test sending screen hard copy i mages to an Ethernet network
printer, do the following steps:
1. On the oscilloscope, push UTILITY > System : I/O > Ethernet
Printer Settings.
2. Select a network printer from the list.
3. Push the System bottom button to select Hardcopy.
To Next Page
Loading...
Need help?
General
