WVR6UP, WVR70UP, and WVR7UP Upgrades
9
Installation Instructions
These instructions are for qualified personnel who are familiar with servicing the
waveform rasterizer. If you need further details for disassembling or reassem-
bling the product, refer to the appropriate product manual. Contact your nearest
Tektronix Service Center or Tektronix Factory Service for installation assistance.
CAUTION. To pr event static discharge damage, service the product only in a
static-free environment. Observe standard handling precautions for static-sensi-
tive devices w hile installing this kit. Always wear a grounded wrist strap,
grounded foot strap, and static resistant apparel while installing this kit.
Serial Numbers
Some kits require specialized installation procedures that depend on the serial
number of the instrument. You can determine your instrument’s serial number by
looking at two locations on the outside of the chassis as shown below:
H Under the external power connection on the rear panel
H On the right side of the chassis behind the front panel
Additionally, the serial number appears on a label that is visible after the cabinet
top cover is removed, as shown in the picture on page 25.
WVR6100, WVR7000, and WVR7100
serial number locations
Rear panel
Side panel
To Next Page
Loading...
Need help?
General
