Kit Description
4
WVR6UP, WVR70UP, and WVR7UP Upgrades
Products
WVR6100 Waveform Rasterizer All inst ruments
WVR7000 Waveform Rasterizer All inst ruments
WVR7100 Waveform Rasterizer All inst ruments
Minimum Tool and Equipment List
Required tools and equipm ent Part number
Screwdriver handle. Accepts TORX-driver bits. General tool. Used for
audio and EYE display options.
NA
T-10 TORX drive bit. Used for removing the rasterizer top cover. Used
for audi o and EYE display options.
NA
T-15 TORX drive bit. Used for removing most of the screws on the
rasterizer. Used for audio and EYE display options.
NA
3/16 Nutdriver. Used for removing and installing audio option boards
for audi o opti ons only that have analog audio I/O connector.
NA
5/16 Nutdriver. Used for loosening and tightening the nuts that secure
the fan bracket when installing a new Power Supply cable.
NA
1/4 Nutdriver. Used for removing or installing internal audio board
mounting posts. Used for audio and EYE display options.
NA
A st andard PC running Windows 98, Windows NT 4.0, Windows ME,
Windows 2000, or Windows XP. Used for installing all options.
NA
Winsock 2.0, an Ethernet interface, and 10 MB of free disk space
must be present on the PC system. Used for installing all options.
NA
To Next Page
Loading...
Need help?
General
