Teldat 4Ge User Manual

Chapter 4 Monitoring via the console
To access the monitoring console of the Teldat 4Ge, you must use a telnet session through the IP address that it
has been assigned using DHCP. To access using telnet, the default user is monitor and the password is teldat.
Once we have accessed the monitoring console, the following commands are available:
4Ge login...
User: monitor
Password: ******
Teldat S.A. (c)2001-2010
Router model 4Ge 35 1 CPU QorIQ P101X S/N: 809/00133
1 LAN, 1 WWAN Line
CIT software version: 11.00.02 Oct 11 2013 17:06:18
4Ge *?
logout Ends the Telnet connection established with the device
monitor Monitor the state of the system
restart Restart the device
4Ge *
By using the monitor command, we can access the monitoring menu. Here we can check the status of the inter-
faces, statistics, connection data, etc.
4Ge *monitor
Console Operator
4Ge +?
buffer Packet buffers assigned to each interface
clear Clear network statistics
configuration List status of current protocols and interfaces
device List statistics for the specified interface
error List error counters
event Event Logging System environment
log Dump log data
memory Display memory, buffer and packet data
network Enter the console environment of a specified network
protocol Enter the commands environment for a specified protocol
queue Display buffer statistics for a specified interface
statistics Display statistics for a specified interface
system Permit monitoring of the system’s memory and stacks
4Ge +
To obtain further information on how to monitor the different interfaces and protocols that the device has, we recom-
mend you check the following manuals: Teldat-Dm781 "Cellular Interface" , Teldat-Dm730 "DHCP Protocol" and
Teldat-Dm750 "Ethernet Subinterface" .
4.1 WWAN Monitoring
By accessing the monitoring menu of the cellular1/0 interface, we can obtain information about the 4G module.
4Ge +network cellular1/0
-- AT Console --
4Ge cellular1/0 AT+?
at-mode Send AT commands directly to the module
buffer Display saved commands and answers
command Send AT command to the module
list List interface and module parameters
module Module related commands
network 3G Network related commands
power-module Module power control
reset Send reset command
exit
4Ge cellular1/0 AT+
We can list this data using the list command.
Teldat S.A.
4 Monitoring via the console
Teldat 4Ge 13

Teldat 4Ge Specifications

General

Brand	Teldat
Model	4Ge
Category	Network Router
Language	English