90 www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Commissioning and configuration
Very important note
Diagnostic data and network traces contain, among other things, data on the device, configuration,
network, connections, audio, video and errors that have occurred. By submitting this information to
us, you agree that we may use it for support purposes. If you grant us remote access, you addition-
ally agree that we may change the configuration of the device for support purposes.
Output information
98 0 # Device type
1 # Firmware version
2 # System
3 # Serial number
4 # MAC address
5 # IP address
6 # Energy supply
7 # Detected hardware
8 # SIP registration
9 # Relay 1
10 # Relay 2
11 # Alarm input
12 # Current date
13 # Current time
This configuration step allows various information about the device in the form of a query voice
output.
Output configuration
99 Configuration step #
This configuration step allows to output other configuration steps to query the current setting.
For example, 99 21# can be used to query the call number set for key 1.
To Next Page
Loading...
Need help?
General
