92 www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Specifications
.
General
Language: German, French or English
Operating mode: SIP telephone, IP intercom station
Configuration: with a web browser via HTTP or HTTPS via a telephone with DTMF dialling,
the keypad or the display, if available
Access protected via password or security code
Network
Connection: Ethernet 100BaseT according to IEEE 802.3, RJ45 or terminals, or
WiFi according to 802.11 b/g/n with WPA2 (only with antenna module)
WiFi only suitable for configuration purposes, must be started in network
configuration mode.
WiFi range depending on mounting situation
Energy supply: PoE according to IEEE 802.3af or
IP address assignment: static, dynamic or link-local
VLAN support: Support for tagged VLANs
own VLAN connection for webcam possible
Time: Synchronisation via NTP, version 4 with public time server (requires Internet access)
or with local time server, if available
Email: Sending e-mails via SMTP or SMTPS
when a call button or the alarm input is triggered or when a sabotage is detected
in case of motion detection by the camera (if available) for logging the access control
Services: Service detection and publication via mDNS
USB expansion port: available with USB expansion port adapter 1 Ethernet port with PoE, RJ45
Operation as absorption or extension port max. available PoE power: 3 W
IP camera integration: automatic integration of a Behnke IP camera connected to the USB expansion port
manual integration of an IP camera (retrieval of the MJPG stream)
UDP communication: Status and remote control messages via UDP compatible with Behnke IP video
software
Port authentication: according to IEEE 802.1x with EAP
EAP-MD5, EAP-TLS, EAP-TTLS (PAP, CHAP, MSCHAP, MSCHAPv2, GTC, MD5) or PEAP
(MSCHAPv2, GTC, MD5)
To Next Page
Loading...
Need help?
General
