Tenda A301 User Manual

6
Step 5 Wait until the Signal LED indicator lights solid blue. Then relocate the extender by
following the on-screen tips for optimal connection quality.
For better performance:
−
Place the extender within the range of your existing WiFi coverage.
−
Place it at an open area without obstacles.
−
Keep it away from electronics with strong interference, such as microwave ovens, Bluetooth-enabled
devices, and refrigerators.
−
Adjust the antennas upward and vertical to the ground.
---- End
Now, you can connect your WiFi-enabled devices to the WiFi network of the extender to access
the internet with the information below:
− SSID: Tenda_01_EXT
− WiFi password: It is the same as that of your wireless router
If you want to modify the SSID of extender and WiFi password, refer to Modify the SSID and password of
the extender with a mobile WiFi-enabled device, or Modify the SSID of extender and WiFi password with
a laptop or desktop computer installed with a wireless adapter.

Tenda A301 Specifications

General

Type	Network transmitter
Maximum transfer distance	- m
Antennas quantity	2
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WEP, WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Wi-Fi data rate (max)	300 Mbit/s
RJ-45 ports quantity (transmitter)	1
Output current	0.7 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	-40 - 70 %
Operating relative humidity (H-H)	10 - 90 %
Certification	CE, FCC
Sustainability certificates	RoHS
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	110 mm
Width	55 mm
Height	39 mm