Tenda PH10 User Manual

14
4.3.1 Changing WiFi Name and Password
Step 1 Choose Wi-Fi to enter the configuration page.
Step 2 Customize your 2.4 GHz or 5 GHz WiFi name and WiFi password.
Step 3 Click OK on the bottom of this page to apply the settings.
--End
You need to reconnect your wireless device to the WiFi network of PA7 after you change the WiFi
settings.
Parameters Description
Parameter
Description
WiFi Name
It specifies the wireless network name of PA7.
Security Mode
It specifies the security mode of the WiFi network of PA7. The device supports none,
WPA2-PSK and WPA/WPA2/PSK. We recommend you to keep the default settings
unless necessary.
WiFi Password
It specifies the wireless network password of PA7.
Hide
If this option is selected, wireless clients cannot search the wireless network of PA7
on their WiFi list. You must manually enter the WiFi name on your wireless clients to
connect them to the WiFi network.

Tenda PH10 Specifications

General

Ethernet LAN	Yes
Certification	CE, FCC
Product color	White
LED indicators	Power, WLAN
Frequency range	2 - 86 MHz
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Antennas quantity	2
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Number of adapters included	1 pc(s)
Sustainability certificates	RoHS
WLAN data transfer rates supported	200, 433 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85171800