Tenda PH10 User Manual

3
2 Hardware Installation
2.1 Installation Instruction
To ensure optimum performance of PH10 and significantly improve the transmission capacity of the network, use
PH10 in the following environment:
Operating Temperature: 0 °C - 40°C
Operating Humidity: (10% - 90%) RH, non-condensing
 Plug P3 and PA7 directly into wall receptacles.
 Ensure that PA7 is vertical to the ground.
 Ensure that all powerline adapters you want to add to the same network should be in the same electrical
circuit.

Tenda PH10 Specifications

General

Ethernet LAN	Yes
Certification	CE, FCC
Product color	White
LED indicators	Power, WLAN
Frequency range	2 - 86 MHz
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Antennas quantity	2
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Number of adapters included	1 pc(s)
Sustainability certificates	RoHS
WLAN data transfer rates supported	200, 433 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85171800