Tenda PH10 User Manual

17
4.4 Guest Network
A guest network is a network dedicated to guests. Clients connected to a guest network can access the internet,
but cannot access the router web UI or the non-guest network. This enables guests to access the internet and
meanwhile ensures security of the non-guest network.
You can set a WiFi name for the 2.4 GHz network and 5 GHz network each. These networks share the same
password. To distinguish between the non-guest WiFi networks of the router and the guest WiFi networks of the
router, do not adopt the same name for the networks.
Choose Guest Network to enter the configuration page.
Click the button to enable this function.

Tenda PH10 Specifications

General

Ethernet LAN	Yes
Certification	CE, FCC
Product color	White
LED indicators	Power, WLAN
Frequency range	2 - 86 MHz
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Antennas quantity	2
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Number of adapters included	1 pc(s)
Sustainability certificates	RoHS
WLAN data transfer rates supported	200, 433 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85171800