11N Wireless Broadband Router User Guide
30
4.5 Bandwidth Control
Bandwidth control is used to limit the communication
traffic of LAN computers when accessing the Internet. It
can simultaneously control maximum of 254 PCs' traffic.
In addition, IP address range configuration is
supported.
¾ Enable Bandwidth Control: To enable or disable
the internal IP bandwidth control. The default is
disabled.
¾ IP Address: The IP address range of the hosts
whose traffic has been controlled. It can be a single
IP address or IP address range.
¾ Upload/Download: To specify the traffic heading
way for the selected IP addresses: upload or
To Next Page
Loading...
Need help?
General
