EasyManuals Logo
Home>Texas Instruments>Motherboard>TPS65982

Texas Instruments TPS65982 User Guide

Texas Instruments TPS65982
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
www.ti.com
Setup
5.3.3.6 Configuration ID 5: Docking System with Thunderbolt Mode Capabilities
Table 8. Configuration ID 5
5.3.3.6.1 Overview
The TPS65982-EVM will boot up and initialize into configuration ID 5 when the 1
st
and 3
rd
DIP switches
[B0] and [B2] on switch bank S1 are pushed to the right-hand side and the 2
nd
, and 4
th
DIP switches [B1]
and [B3] on switch bank S1 is pushed to the left-hand side. Configuration ID 5 is designed to model a
Thunderbolt docking system application.
A TPS65982-EVM configured as a dock is capable of providing (sourcing) power. The fully-featured Type-
C port of a dock which faces a monitor can be a downstream-facing port (DFP) for DisplayPort video and
Thunderbolt Alternate Mode video+data, which is also emulated by this EVM configuration. This
configuration will initiate a PD power role swap to source.
5.3.3.6.2 Source Capabilities
This configuration is capable of negotiating PD contracts to source 5 V at 3 A through the PP_5V0 internal
FET path, 12 V at 3 A through the PP_HV internal FET path, and 20 V at 5 A through the PP_EXT
external FET path.
5.3.3.6.3 Sink Capabilities
This configuration is capable of negotiating a PD contract to sink 5 V at 0 A.
5.3.3.6.4 Video Capabilities
This configuration is capable of negotiating a USB PD Thunderbolt Alternate Mode contract for video+data
as a downstream-facing port (DFP). This configuration is also capable of negotiating a USB PD alternate
mode contract for DisplayPort video as a downstream-facing port (DFP). An alternate mode contract will
only be negotiated successfully when connected to a product which is capable of Thunderbolt Alternate
Mode or DisplayPort video as an upstream-facing port (UFP).
5.3.3.6.5 Ideal Connections
This configuration pairs ideally with a TPS65982-EVM using configuration ID 2 for providing power and
entering Thunderbolt Alternate Mode for video+data. This configuration is also compatible with a
TPS65982-EVM using configuration ID 4 entering DisplayPort alternate mode. These TPS65982-EVM
configurations respectively emulate notebook and charger-adapter applications and the same performance
is expected when connected to actual applications of these products.
19
SLVUAF8CJune 2015Revised November 2015 TPS65982 Evaluation Module
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

Other manuals for Texas Instruments TPS65982

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Texas Instruments TPS65982 and is the answer not in the manual?

Texas Instruments TPS65982 Specifications

General IconGeneral
BrandTexas Instruments
ModelTPS65982
CategoryMotherboard
LanguageEnglish

Related product manuals