Premier Elite ComIP Installation Manual
10 INS273-6
Push Notifications. The app instructions also include a pictorial guide and can be found in the App
under Settings>Help
Local Connection
Once the app is installed do the following:
• Click to Open
• Login the default User Name and Password are Master & 123456 respectively.
• You will be asked if you want to use the New Layout, choose yes
• Choose My Sites
o A warning box will appear saying you have No Site Settings, take note of the
instruction and press OK
• Swipe Left (iOS) or hold (Android) on the Site Name and choose Edit
• Click on Site Name and enter a Site Name & Site Summary
• Click Back and then IP Details, enter the IP address and Host Port of the ComIP from the
previous steps in these instructions.
o Update IP should be enabled if you want to setup Push Notifications.
o Stay Connected stops the app disconnecting from the control panel when
swiping between screens.
• Click Back then Security Details, enter the UDL Password from the Control Panel. This
cannot be left blank and must match the Control Panel UDL password. For details on
Protected UDL Password please see the app Instruction Manual.
• Click Back and then User Areas, Enter the User Code that you use with the Control Panel
and the User Number. The User Number will be for example 1, do not type User 1.
The app is now set up for Local (LAN) connections.
Remote connection & Push Notifications
For remote connections it is highly recommended that you enable Push Notifications. This will mean
that Texecom will track the IP address and update it as required. If the service provider does not
provide you with a fixed IP address (most don't) you will require a third party DDNS provider to allow
the app to operate remotely if you do not "Enable" push notifications.
Port Forwarding must be setup on the router to allow remote connections. Please see
Page 8
Follow the instructions given above for Local Connections and then do the following:
• Click on My Sites then enter Edit mode for the chosen site.
• Click on Notifications. You must press Yes and accept the disclaimer before you can
proceed.
• Choose & enter a User Name
• Choose & enter a Password
• Enter a valid Email Address (Notifications will not be setup without a valid address)
• Leave the Account Number field blank.
• Click Register Account
You will receive an email with a Verification Code, follow the instructions in the email. Enter the
Verification Code you are given into the Account Number box and press Register. Once you have
completed this step the Account Number will be automatically populated with an Account Number
To Next Page
Loading...
Need help?
General
