6 Signals
6.1 Signals on motor housing
Signal Meaning Action
Constant blue light The stairlift is switched on. -
Constant blue light –
slightly dimmed
The stairlift is in sleep
mode on a parking point
-
No light The stairlift is in sleep
mode, but not on a parking
point
Move the stairlift to a
parking point
No light The stairlift is switched off. Switch on the stairlift by
operating the main switch
6.2 Sound signals from motor housing
Signal Description
Arrival sound Double beep
Emergency lowering sound Double beep, every second
Start sound Double beep
Warning sound Fast intermittent beeps
Error sound Intermittent beeps (of 2800 Hz to 7 KHz)
6.3 Signals on joystick user interface
6.3.1 Signals when operating the stairlift
Signal Meaning Action
Constant green light The joystick has been operated
and the stairlift is moving.
-
Constant green light
+ start sound
The joystick has been operated
and the stairlift starts moving
-
Blinking green light
for 5 seconds +
arrival sound
The stairlift has arrived at the
halt point
Release the joystick and fold it
down
Signals 41
To Next Page
Loading...
Need help?
General
