ThyssenKrupp S200 User Manual

Signal Meaning Action
Blinking green light
for 5 seconds +
arrival sound
The stairlift has arrived at the
halt point
Release the emergency
lowering button
Constant red light +
error sound
Malfunction Switch the stairlift off and on
again. If the stairlift does not
respond, contact your supplier
Blinking red light +
warning sound
Emergency stop button is
activated
Deactivate the emergency stop
button
6.3.3 Signals when oprating the emergency key lock
Signal Meaning
Blinking green light 1 time The stairlift is unlocked for use
Blinking orange light 2 times The stairlift is locked
6.4 Signals on call-and-park station
Signal Meaning Action
Blinking green light The call-and-park button has
been operated and the stairlift
is moving
-
Blinking green light
+ start sound (from
stairlift drive)
The call-and-park button has
been operated and the stairlift
starts moving
-
Blinking green light
for 5 seconds +
arrival sound (from
stairlift drive)
The stairlift has arrived at the
halt point
Release the call-and-park
button
Blinking orange light
+ warning sound
(from stairlift drive)
Not all conditions are met:
the stairlift does not start.
Check and meet all conditions:
- armrests locked in correct
position
- safety belt fastened
- keylock not activated
Blinking orange light
2 times
Joystick or emergency
lowering button is active
-
Blinking orange light The call-and-park battery is
low
Replace the batteries
Signals 43

ThyssenKrupp S200 Specifications

General

Brand	ThyssenKrupp
Model	S200
Category	Stairlifts
Language	English