ThyssenKrupp S200 User Manual

1.3 Intended use
The stairlift has been designed to transport one person up and down the stairs. The
stairlift can be used for straight stairs and curved stairs. The stairlift is intended for
indoor use only.
The stairlift operates with an electric motor that is powered by rechargeable batteries in
the drive. The batteries are charged at the charging points at the top and bottom of the
stairs or at intermediate floors. As an option, the batteries can also be charged at any
additional charging point.
The stairlift can be operated in three ways:
- While you are seated on the stairlift, use the joystick user interface in one of the
armrests.
- If the stairlift is not in the required place, use the call-and-park control stations
on each floor to call the stairlift.
- In case the chair user is not capable of operating the stairlift themself, use an
attendant control (optional).
2 Introduction

ThyssenKrupp S200 Specifications

General

Brand	ThyssenKrupp
Model	S200
Category	Stairlifts
Language	English