@ Take off t,he flywheel cover. by removing the four fixing bolts.
Fig. 43
@ Wind the starter rope around the flywheel a few t,urns Give it a sh-
arp tug to start t,he engme Use a socket wrench or smular to get
a firm grip on t,he end of t.he rope
nnected
to the butts-# also when
Fig. 44
Be careful that your clothes or other items do not get caught in the
rope or other engine parts.
To prevent your clothes and other items from getting caught in the
engine, do not install the flywheel cover nor the upper engine
cover after the engine is started with the starter rope.
Immediately contact an authorized TOHATSU sewice shop when
reaching shore.
To Next Page
Need help?
General
