14. INSPECTION AND MAINTENANCE
Perform the following checks and inspection before and after use.
m Daily Inspection
Fuel
System
Lubricatic
System
Electrical
Equipmer
Throttle
System
Points to Check
0 Check the amount of fuel in the tank.
0 Check for dust or water in the fuel filter.
0 Check rubber pipes for oil leakage.
0 Check the amount of engine oil in the oil tank.
0 Check for dust or water in the oil filter.
l
Check the spark plugs for dirt wear and carbon
built-up.
Spark plugs : NGK B-SHS-lO/BR-BHS-10 or
CHAMPION L-78C (1 .O mm gap)
Actlo;
Replenish
Ckall
ReplaCe
Replenish
ClEln
Clean or
replace
l
Check if the main switch functions normally. Remedy or
replace
l
Check if the battery electrolyte level and specific Replenish
gravity are normal.
or
recharge
l
Check for loose connections on battery terminal. Retighten
or
charge
D Check if the emergency stop switch functions Remedy or
normally and make sure the lock plate is present.
replace
D Check cords for loose connections and damage.
correct or
replace
D Check if the choke solenoid and valve for the
carburetor works normally.
B Check if the carburetor and magneto work normally Correct
when mow the throttle control lever and also check
links for looseness.