2. REMOTE CONTROL BOX (model RC5E)
The following explains inst,allat,ion for right~hand driving.
m Installing the Remote Control Box
n
Position the Kernote Control Box in a place that will not interfere
with handling of controls, levers and switches. Confirm that there
are nc obstacles in the passage of remote control cables
Fig. 7
n
Determining the Kernok Control cable length:
Use distances “A” and “B”, as depicted in the illustrations, as guide
lines for the Kemot,e Control cable length, and add an additional 300
mm (1 foot)~
Fig. B
I
To prevent accidental running of the engine, which could result in an
injury. DO NOT connect the battery cables to the battery until the in-
stallatlon of the Remote Control Box and the enaine
IS comolete.
14
To Next Page
Loading...
Need help?
General
