V. Starting up the Generator
(1) Disconnect all devices from the generator
(2) Switch ECO-MODE switch to "OFF"
(3) Turn ventilation knob of fuel tank cap to
"ON"
(4) Turn combination switch control to the
"CHOKE VALVE" position
eration
Choke
valve
Tip: If the engine is hot, start the generator in the "RUN" position
Tip: When pulling the recoil, be sure to keep a tight grip to prevent the
unit from falling over.
VI. Shutting Down the Generator
(1) Turn the combination switch to the "OFF" position;
(2) After the generator has completely cooled down, turn the entilation
knob on fuel tank cap to the "OFF" position.
(5) First gently pull recoil cord handle, until the cable is hooked tight,
and then pull with force.
(6) Once the generator starts, move the combination switch
to the "RUN" position.