TomTom ONE Manual

Chapter 3
Getting started
5
Getting started
Switching on
Follow the instructions on the Installation Poster to dock your TomTom ONE in
your car.
The first time you switch on your TomTom ONE, it may take up to 20 seconds to
start. To switch off your TomTom ONE, press and hold the On/Off button for 2
seconds.
Setting up
You have to answer a few questions to set up your TomTom ONE. Answer the
questions by tapping the screen. You will use the touchscreen for everything you
do with your ONE.
You can change these settings at any time using the Preferences menu. For
information about the Preferences menu, see
Preferences on page 29.
Once you have answered the questions, your ONE will display the Driving View.
The Driving View is shown in black and white until your ONE locates your current
position.
For more information about the Driving View, see
Driving View on page 13.
Locating your current position
Your TomTom ONE must be outdoors to locate your current position. The first time
you start your ONE, it can take up to 5 minutes to find your current position. If it
takes longer than 5 minutes, make sure that you are in an open place without tall
buildings or trees around you.
In the future, your position will be found much faster, normally within a few
seconds.
Once your ONE has located your current position, the Driving View is shown in full
colour and shows your position on the map.

TomTom ONE Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Display resolution	480 x 272 pixels
Display number of colors	65536 colors
Display size (HxV) (imperial)	4.3 \
Internal memory	1024 MB
Processor frequency	266 MHz
Bluetooth version	2.0+EDR
Battery life (max)	2 h
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Depth	27 mm
Width	119 mm
Height	86 mm
Weight	208 g