3.6- USE LIMITS
3.7- PACKAGE
The actuator has been designed and manufactured exclusively for the destination of
use given in , therefore, any other type of use is strictly forbidden in order to
assure in any moment the safety of the installer and of the user, as well as the
efficiency of the actuator itself.
Each standard package of the product (cardboard box) contains :
• No. 1 Actuator equipped with power supply cable;
• No. 1 Support ;
• No. 1 Bracket for hopper opening ;
• No. 1 Small parts package (window connection bracket, nuts, pin and fastening
screws for aluminium window frames) ;
• No. 1 Adhesive drilling template ;
• No. 1 Installation and use instructions .
par.3.5
(Fig.5)
(Ref.A)
(Ref.B)
(Ref.C)
(Ref.D)
(Ref.E)
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR FOR IMPROPER USES OTHER
THAN THE ONE FORESEEN BY THE MANUFACTURER (SEE PAR.3.5).
IT IS STRICTLY FORBIDDEN TO INSTALL THE ACTUATOR ON THE EXTERNAL SIDE OF
THE WINDOW FRAME SUBJECT TOATMOSPHERICAGENTS (RAIN, SNOW, ETC.).
THE USE OF THE ACTUATOR IN ENVIRONMENTS WITH POTENTIALLY EXPLOSIVE
ATMOSPHERE IS STRICTLY FORBIDDEN.
IT IS COMPULSORY TO KEEP THE PACKAGE AND THE ACTUATOR OUT OF REACH OF
CHILDREN.
MAKE SURE THAT THE ABOVE DESCRIBED COMPONENTS ARE CONTAINED IN THE
PACKAGE, AS WELL AS THAT THE ACTUATOR HAS NOT BEEN DAMAGED DURING
TRANSPORT.
SHOULD ANYANOMALY BE DETECTED, IT IS FORBIDDEN TO INSTALL THE ACTUATOR,
AND IT IS COMPULSORY TO REQUIRE TECHNICAL ASSISTANCE FROM YOUR DEALER
OR THE MANUFACTURER.
THE PACKAGING (PAPER, PLASTIC, ETC.) HAS TO BE DISPOSED ACCORDING TO THE
LAWS IN FORCE.
10
3- TECHNICAL DESCRIPTION ACK4
INSTALLATION AND USE ISTRUCTIONS
EX
VER.1.0
REV.11.05
To Next Page
Loading...
Need help?
General
