5.1- GENERALINSTRUCTIONS
THE ACTUATOR INSTALLATION CAN BE PERFORMED EXCLUSIVELY BY COMPETENT
AND QUALIFIED TECHNICAL PERSONNEL SATISFYING THE PROFESSIONAL AND
TECHNICAL REQUIREMENTS FORESEEN BYTHE LAWS IN FORCE IN THE COUNTRY OF
INSTALLATION.
THE ACTUATOR PERFORMANCE MUST BE SUFFICIENT TO ASSURE THE CORRECT
MOVEMENT OF THE WINDOW. IT IS COMPULSORY TO VERIFY THE THRUST OR
TRACTIVE FORCE ACCORDING TO THE TYPEAND WEIGHT OF THE WINDOW (PAR. 3.4).
IT IS FORBIDDEN TO EXCEED THE LIMITS GIVEN IN TAB.1 CONCERNING THE
TECHNICAL DATA(PAR.3.3).
THE ACTUATOR INSTALLATION MUST BE PERFORMED EXCLUSIVELY WITH CLOSED
WINDOW OR SKYLIGHT.
BEFORE PERFORMING THE INSTALLATION OF THE ACTUATOR ON HOPPER
WINDOWS, VERIFY THAT ON BOTH SIDES OF THE WINDOW TWO COMPASS STROKE
LIMIT DEVICES ARE INSTALLED IN ORDER TO AVOID THE ACCIDENTAL FALL OF THE
WINDOW.
FOR CORRECT OPERATION OF THEACTUATOR, THE WINDOW MUST HAVE A MINIMUM
HEIGHT OF 800 mm (DISTANCE OF THE ACTUATOR FROM THE WINDOW OPENING
HINGE). OTHERWISE, ASK YOUR DEALER OR THE MANUFACTURER FOR THE
NECESSARYACCESSORIES FOR ACORRECT INSTALLATION.
VERIFY THAT THE DISTANCE "D" BETWEEN THE FIXED PART OF THE WINDOW (ON
WHICH THE FIXING OF THE ACTUATOR IS FORESEEN - FIG.6-REF.1) AND THE
MOVABLE PART OF THE WINDOW (ON WHICH THE BRACKET FIXING IS FORESEEN -
FIG.6-REF.2) IS INCLUDED WITHIN 0 AND 10 mm. OTHERWISE, ASK YOUR DEALER OR
THE MANUFACTURER FOR THE NECESSARY ACCESSORIES FOR A CORRECT
INSTALLATION (SEE CHAP.8)
13
ACK4
INSTALLATION -5
2
1
D= 0 10 mm÷
Fig.6
INSTALLATION AND USE ISTRUCTIONS
VER.1.0
REV.11.05
To Next Page
Loading...
Need help?
General
