6
• Using the machine demands attention. To prevent loss
of control:
– Do not drive close to sand traps, ditches, creeks, or
other hazards.
– Reduce speed when making sharp turns. Avoid
sudden stops and starts.
– When near or crossing roads, always yield the
right-of-way.
• The grass basket must be in place during operation of
the reels or thatchers for maximum safety. Shut the
engine off before emptying the baskets.
• Do not touch the engine, muffler, or exhaust pipe
while the engine is running or soon after it has stopped
because these areas could be hot enough to cause
burns.
• Stay clear of the rotating screen at the side of the
engine to prevent direct contact with your body or
clothing.
• When a person or pet appears unexpectedly in or near
the mowing area, stop mowing. Careless operation,
combined with terrain angles, ricochets, or improperly
positioned guards can lead to thrown object injuries.
Do not resume mowing until the area is cleared.
Maintenance and Storage
• Check all fuel lines for tightness and wear on a regular
basis. Tighten or repair them as needed.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting unit,
attachments, and any moving parts, especially the
screen at the side of the engine. Keep everyone away.
• To ensure safety and accuracy, have an Authorized
Toro Distributor check the maximum engine speed
with a tachometer. Maximum governed engine speed
should be 3600 RPM.
• If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
• Use only Toro-approved attachments and replacement
parts. The warranty may be voided if used with
unapproved attachments.
Sound Pressure Level
This unit has an equivalent continuous A-weighted sound
pressure at the operator ear of: 88 dB(A), based on
measurements of identical machines per procedures
outlined in Directive 98/37/EC and amendments.
Sound Power Level
This unit has a guaranteed sound power level of:
100 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.
Vibration Level
This unit has a hand–arm vibration level of 4.00 m/s
2,
based on measurements of identical machines per ISO
5349 procedures.
To Next Page
Loading...
Need help?
General
