12
Fuel Filter and Hose Replacement
- Fuel is Extremely Flammable - Use Extreme Caution When Servicing Fuel System
1. Drain the fuel tank into an approved container.
NOTE: Ensure fuel system contains no fuel to prevent leakage when the fuel filter is replaced.
2. Release the fuel filter / fuel hose clamps (A) and slide them away from the fittings.
3. Remove the fuel filter / hose asm. from the engine.
4. Properly install new fuel filter / hose asm. and hose
clamps (A).
5. Re-fill tank with fresh fuel.
6. Verify hose routing and check for leaks.
7. Properly dispose of any unused fuel.
To Next Page
Need help?
General
