Toro LC1P92F User Manual

4
Engine Fastener Torque Specifications
Oil Drain Valve
7 ft-lbs (10 Nm)
Oil Filter Adaptor Bolt
31 ft-lbs (42 Nm)
Spark Plug
20 ft-lbs (28 Nm)
Connecting Rod Bolts
12 ft-lbs (16 Nm)
Crankcase Cover Bolt
20 ft-lbs (28 Nm)
Fuel Pump Asm. Mounting Bolts
7 ft-lbs (10 Nm)
Breather Plate Bolts
7 ft-lbs (10 Nm)
Cylinder Head Bolts
40 ft-lbs (54 Nm)
Rocker Arm Studs
23 ft-lbs (31 Nm)
Rocker Arm Pivot Lock Nut
11 ft-lbs (15 Nm)
Alternator Bolts
7 ft-lbs (10 Nm)
Valve Cover Bolts
7 ft-lbs (10 Nm)
Flywheel Nut
81 ft-lbs (110 Nm)
Ignition Coil Bolts
7 ft-lbs (10 Nm)
Starter Motor Bolts
20 ft-lbs (28 Nm)
Carburetor Mounting Nuts
7 ft-lbs (10 Nm)
Throttle / Choke Bracket Asm.
Bolts
7 ft-lbs (10 Nm)
Fan Cover Nuts
7 ft-lbs (10 Nm)
Fan Shroud Bolts
7 ft-lbs (10 Nm)
Standard Torque Values
M5 Bolt / Nut – 4.5 ft-lbs (6 Nm)
M6 Bolt / Nut – 7.5 ft-lbs (10 Nm)
M8 Bolt / Nut – 19 ft-lbs (26 Nm)
M10 Bolt / Nut – 28 ft-lbs (38 Nm)
M12 Bolt / Nut – 41 ft-lbs (55 Nm)

Toro LC1P92F Specifications

General

Brand	Toro
Model	LC1P92F
Category	Engine
Language	English