Toro LDC-6 User Manual

4
THE CONTROLLER
The Controller has the following features, which
will be explained in detail throughout this
manual:
used to select functions:
• OFF
stops irrigation
• AUTO RUN
automatically run watering programs
• SET CLOCK/CALENDAR
set the date and time
• SET START TIMES
set the watering start times
• SET WATERING DAYS
set the days that watering is to occur
• SET STATION RUN TIMES
set the durations of programmed watering
• SET AUXILIARIES
- Rain Sensor
turn on/o the rain sensor function
- Main Valve/Pump Start
- Pump Delay
Turns the pump on first and then the station
after a delay, allowing for pressure to build.
- Station Delay
Delays the opening of the next station on
sequence to give time for the previous sta-
tion to close. Useful for slow to close valves.
• SYSTEM TEST or RUN SINGLE STATION
• RUN PROG.
Control Dial
LCD Display
Control Buttons
Backup Battery, Control Wiring Terminals
used to navigate through the programming
equences
(beneath a cover)
Control Panel
Note: If the mains power to the unit is o, to conserve battery energy, the LCD display automatically
switches o after about 15 seconds of operator inactivity. Press to see the display again. When
mains power is o, the controller does not run the automatic programs, but the clock/calendar and all
program information is retained
LCD Display
Control
Buttons
Backup Battery and
Control Wiring Terminals
Control Dial
Rain Sensor
Switch

Toro LDC-6 Specifications

General

Brand	Toro
Model	LDC-6
Category	Controller
Language	English