EasyManuals Logo
Home>Toro>Controller>TMC-424

Toro TMC-424 User Manual

Toro TMC-424
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
There are several methods by which the TMC-424 can be operated manually.
A separate Function Dial position is provided for Manual Stations operation
and Manual Programs operation.
Manual Operations by Station
The TMC-424 offers two ways to manually activate individual stations. The first
method, called "True Manual" enables an individual station to be simply turned
on without a specified run time duration.
The second method called “Timed Manual” enables selected stations to be run
with a selected (temporary) run time duration.
• True Manual Operation
1. Turn the Function Dial to the Manual Stations position.
2. Press the button as needed to display the station number (flashing).
3. Press the button to turn on the station. ON and the Water On icon will be
displayed.
Note: The station will run continuously until any button is pressed or the
Function Dial is turned. Watering will terminate at midnight if left unattended.
IMPORTANT: True Manual operation will override all flow-sensing limits.
• Timed Manual Operation
1. Turn the Function Dial to the Manual Stations position.
2. Press the button as needed to display the station number (flashing).
3. Press the button to turn on the station. ON and the Water On icon will
be displayed.
4. Press the or buttons to select a run time.
5. Repeat steps 2 – 4 to continue selecting stations and assigning run times.
6. When all stations to be operated are displayed, turn the Function Dial to the
RUN position. The operating station number and the Water On icon will
be flashing. The stations will operate one at a time in numeric sequence. The
automatic mode will resume when the manual operation is finished.
Note: To turn off an active station and start the next station in sequence,
press the button. Manual operation will be terminated when the last station
number displayed has completed it’s run time or has been skipped.
To end the a manual operation at any time, turn the Function Dial to the OFF
position. Wait for OFF to stop flashing, then turn the dial to the RUN position.
Manual Operations
12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro TMC-424 and is the answer not in the manual?

Toro TMC-424 Specifications

General IconGeneral
BrandToro
ModelTMC-424
CategoryController
LanguageEnglish

Related product manuals