SPECIFIC INFORMATIONS
– 17 –
PROCEDURES TO SET HOTEL MODE
1. Set the Channel Programs which you want the Customer to watch.
1) Use ASM (see page 15) or SEARCH (see page 15) to select the programs.
2) Choice the position you want the programs to be stored in TUNING menu.
3) Save the programs by MEMORY operation in TUNING menu (see page 15).
2. Set the Channels which you don’t want the Customer to access
1) Select the channel by pressing the number buttons or CH s/t buttons.
2) Set the SKIP from OFF to ON (see page 16).
3) Repeat above 1) & 2) for all the channels which need to be blocked.
3. Activate the HOTEL Mode:
1) Select startup channel (TV, A1, A2) first, then enter into design mode (see page 9).
2) Press CH t button on the remote controller to show the Design Item “OPT”.
3) Add “0x80” to the data of “OPT” to activate the HOTEL Mode with panel buttons unlocked, or add “0x08” to the data
of “OPT2” to activate the HOTEL Mode with panel buttons locked.
4) AC Power OFF the TV, then next time AC Power ON the TV will in HOTEL Mode with all the customer settings
taking effect.
4. Set the maximum volume:
1) Enter Service Mode (see page 6).
2) Enter Design Mode (see page 9).
3) Use the CH t button on the remote controller to show the Design Item “VOLX”.
4) Adjust the “VOLX” data by pressing ;+/- buttons (Default 0x64 is equal to Volume 100 in Decimal).
5. Set the following Items in HOTEL Mode:
1) Picture mode
Press h button to select the desired picture quality. “DYNAMIC”, “STANDARD”, “MILD” and “MEMORY” will appear
cyclically.
2) Sound mode
Press 8 button to select the desired sound quality. “THEATER”, “NEWS” and “MEMORY” will appear cyclically.
(Every time AC Power ON the TV will call back the above customer setting.)
To Next Page
Loading...
Need help?
General
