English
27
CONTROLS AND FEATURES
General controls
Selecting programme
positions
To select a programme position, press the
numbered buttons on remote control.
The programme positions can also be selected
by pressing P
and P .
To display on-screen information, i.e. programme
position, input mode, or stereo/mono signal,
press
. Press it again to cancel.
Time Display
The time display facility allows the current (text
service) time to be seen on the television screen.
Press
on the remote control whilst watching
a normal television broadcast to see the time
display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE: This option is available for Analogue TV
mode only and may not be available in some
cases.
Stereo and Bilingual
transmissions
If the stereo or dual language broadcasts are
transmitted, the icon
Stereo or Dual will
appear on the screen each time the programme
positions are changed, and will disappear after a
few seconds. If the broadcast is not in stereo, the
icon
Mono will appear.
Stereo… Press
to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If
they are transmitted, the icon
Dual will
display. Choose the required programme number.
If the
Dual appears, press to select
Dual1, Dual2, or Mono.
Quick Access Menu
Quick access menu helps you access some
options quickly, such as Picture Mode, Picture
Size, Sleep, REGZA-LINK, and Media Player.
Press QUICK button to display the Quick access
menu and press ▲ or ▼ to select the option.
Quick access
Picture Mode
Picture Size
Sleep
Standard
Wide
Off
REGZA-LINK
Media Player
To Next Page
Loading...
Need help?
General
