Do you have a question about the Toshiba 1TN and is the answer not in the manual?
Outlines the necessary steps and conditions before beginning the printer installation process.
Instructions for installing a filler panel, an important part of an integrated system for printer positioning.
Explains the two main setup configurations for the printer: integrated and distributed.
Guide for installing the optional 58 mm wide paper roll guide into the paper bucket.
Steps to install the optional 58 mm wide paper guide into the printer.
Instructions on how to mount the optional wall mounting bracket for the printer.
Procedure for attaching the printer securely to the previously installed wall mounting bracket.
Details on how to adjust the paper low sensor for proper function when the printer is wall-mounted.
Steps to install optional interface cards like Ethernet, WiFi, or RS-232.
Guidance on connecting various communication cables (USB, Ethernet, RS-232) to the printer.
Explains the function and usage of the USB cable strain relief for secure connections.
Instructions for configuring network settings, applicable for WiFi or Ethernet options.
Details on configuring the WiFi option for the printer, either as a client or access point.
Steps to configure the WiFi option by connecting directly to a WiFi network.
Procedure for setting up the WiFi option using a USB connection and configuration utility.
Instructions for setting up the Ethernet option to connect the printer to a network.
Steps to configure the Ethernet option using a USB connection and the configuration utility.
Procedure for setting up the Ethernet option by connecting directly to the network.
Guide on how to use the TCx Printer Configuration Utility for setup and customization.
Instructions for configuring the printer through its web interface.
Information on setting up the RS-232 communication parameters and interface options.
Overview of printer settings customization using utilities, including fonts, messages, and graphics.