Connecting an audio system
Back panel of TV
You will need:
,, one set of standard audio cables
Amplifier
Connecting an AV amplifier with built=in digital surround
This connection allows you to use an audio amplifier with built-in
digital surround and external speakers.
You will need:
,, one coaxial digital cable
,, Six sets of speaker cables
TV
Note:
For additional information, please refer to your
amplifier owner's manual.
AV Amplifier with built=in digital surround
(Left)
TV
Subwoofer Front
/ Speaker
_ _(Right)
Center Speaker
_ Surround Speaker
(Left)
_ Surround
Speaker (Right)
The COAXIAL DIGITALAUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver's inputs.
Consult the owner's manual for your receiver to determine the best way to switch between the analog and digital signals.
13
J3W41121A(E) P07-13 13 14/03/2006, 3:32 PM
To Next Page
Loading...
Need help?
General
