Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV's speakers.
The feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode, if available (see "Selecting stereo/SAP
broadcasts" on page 32.)
2. Press MENU, then press 4 or D,-to _j_
display the AUDIO menu ......
A
3. Press A or 'V to highlight
SURROUND.
4. Press _ or _ to highlight ON.
q__,:SELECT L_I:A#JUST
To turn off the surround sound feature:
Highlight OFF in step 4 above.
In general, you can leave your TV in surround mode because it will
automatically output the type of sound being broadcast (surround
stereo or monaural).
Resetting your audio adjustments
The RESET function returns your audio adjustments to the following
factory settings:
MTS ................. STR
Bass ................. center (25) Digital output ..................... PCM
Treble ............... center (25) Stable sound ..................... OFF
Balance ............ center (0) Surround ........................... OFF
To reset your audio adjustments:
1. Press MENU, then press _ or _- to
display the AUDIO menu.
2. Press A or V to highlight RESET,
and then press I_.
A_Z#-L_Z
STABLE SOUND OFF
SURROUND OFF
1_} :SELECT t_] :ADJ UST
Recall
Exit
Checking the digital signal strength
You can check the strength of the digital signal by viewing the digital
signal meter.
To view the digital signal meter:
1. Press MENU, then press 4 or _-
to display the SETUP menu. s..........
2. Press A or V to highlight SIGNAL .....................
METER. _,m,_B_ _o
3. Press _ or I_ to check the digital
signal strength.
4. Press EXIT to return to the normal screen.
Notes:
° The SIGNAL METER feature is not
available for analog channels.
, After approximately 240 seconds, the
SIGNAL METER screen will return to
normal TV-operation automatically.
, When you select a vacant channel, the
signal meter may reacL
Displaying TV status information on-screen
Press RECALL to display the following information on-screen:
, Clock
, Channel number or VIDEO
mode selected _A_......
TV.PG L
ON TIMER
,, Channel label (if set) _,......
OFF TIMER 12:00PM
• Stereo or SAP (second audio .................
program) audio status
, Content rating
• On timer, Off timer, Sleep timer
(if set)
Picture size 34
o
ANT
ABeD
CABLE
c.ocK _2:OOAMsu. 007
J3W41121A(E) P31-Back 34 14/03/2006, 3:40 PM