Toshiba 50L711U18 User Manual

28
50
L
711
U
18
/
50
L
711
M
18
/
55
L
711
U
18
/
55
L
711
M
18
50" / 55" 2160p (4K), 60Hz, LED Chromecast built-in TV
www.tv.toshiba.com
Connecting an antenna or cable TV (no box)
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your TV and to the antenna or
cable TV wall jack.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Press INPUT to open the Input Selection list.
5 Press
S or T to highlight ANT/CABLE, then press OK.
6 If you cannot tune to channels you know exist, scan for channels. See Automatically scanning for channels on
page 72.
Coaxial cable
Antenna or cable
TV (no box)
Back of TV
Coaxial cable
connector
ANT / CABLE IN
jack
On your TV
Notes
• Use a coaxial cable to eliminate interference and noise from radio waves.
• Do not bundle the coaxial cable with the power cord or other cables.
• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.
• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a
highly directional outdoor or set-top antenna with a built-in amplifier.
• If the picture quality is good on some channels and poor on others, the problem may be caused by
a poor or weak signal from the broadcaster or cable TV provider.
• If you connect to cable TV without a set-top box and experience poor picture quality, you may
need to install a set-top box to improve signal reception and picture quality. Contact your cable TV
provider about upgrading to a set-top box.
• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture
displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it
would be if the content was originally recorded in HD.

Toshiba 50L711U18 Specifications

General

Style	Flat
Color	Black
Screen Type	LED
Stand Type	Simple
Wall Mount	VESA 400 x 200mm
Tilt	-
Sound	Dual 10 W+10 W Speakers
Features	Voice Interaction
Connectivity	Bluetooth
SmartTV	Apps
Interface Connectors	Antenna/Cable
Operation Conditions	-
Tuner	digital
Screen Size	50 in (49.5 in)
Aspect Ratio	-
Resolution	2160p
Refresh Rate	60Hz
Viewing Angle	-
Response Time	-
Brightness	-
Contrast Ratio	-
Color Support	-
Closed Captioning	yes
Motion Enhancement	motion rate 60
HDR	yes
Battery Type	-
Power Supply	100~240Vac
Power Consumption	72 W
Depth with Stand	11.1 in
Height with Stand	28.3 in
Width with Stand	44.6 in
Net Weight with Stand	32 lbs
Depth without Stand	95 mm
Height without Stand	26.4 in
Width without Stand	44.6 in
Net Weight without Stand	30.6 lbs
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	20 watts
HDMI ARC Ports	yes
USB Ports	1
USB 2.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	1
VGA Ports	0
Remote Control	standard
3D	no