Toshiba 50L711U18 User Manual

71
50" / 55" 2160p (4K), 60Hz, LED Chromecast built-in TV
www.tv.toshiba.com
• TV Speakers—Turns your TV’s speakers on or
off. You can select:
• Auto—Turns off the TV speakers when you
connect a device to the /AUDIO OUT jack.
• On—Keeps the TV speakers on when you
connect a device to the /AUDIO OUT jack.
• Off—Turns off the TV speakers.
• MTS—(Analog channels received through the
ANT / CABLE IN jack only) Selects the audio
mode. You can select:
• Stereo—Select this option for programs
broadcast in stereo. You can typically leave
your TV in Stereo mode because Stereo
outputs the type of sound being broadcast
(stereo or mono).
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• SAP—Select this option to listen to a
secondary audio program, if available. If you
select this option and no secondary audio
program is available, you may not hear
sound. Change the MTS option to Stereo.
• Digital Audio Selection—Lets you
conveniently switch between audio tracks on a
digital channel (when available). This option
temporarily overrides the Primary Audio
Language option on the Sound menu.
• Primary Audio Language—Selects the
language for digital channels.
• Digital Audio Output—Opens the Digital Audio
Output menu where you can adjust digital audio.
• Audio Format—Selects the digital audio
format sent to an external audio system. You
can select:
• PCM (to convert and output sound as
PCM (pulse-code modulation) format).
• Auto (to pass through the original digital
sound).
• Audio Delay—Fine tunes the audio when it
is not in sync with the video. You can select
Auto or Manual.
• Delay adjustment—Lets you set the
amount of delay to manually sync the audio
with the video. To use this option, Audio
Delay must be set to Manual.
3 Press
W X S or T to adjust the option or select a
setting, then press OK.
4 Press EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
1 Press MENU, press
S or T to highlight Options,
then press OK.
2 Highlight Power Management, then press OK.
3 Highlight Audio Only, then press OK.
4 Highlight On or Off, then press OK.
5 Press EXIT to close the menu.
Note
If the Voice Guide is turned on, the TV
Speakers option can only be set to Auto.
Note
If the Voice Guide is turned on, the Audio
Format option can only be set to PCM.
Notes
• The picture turns off in about five
seconds.
• Press any button to turn on the picture
for about five seconds.
• To exit audio only mode, repeat this
task and select Off.

Toshiba 50L711U18 Specifications

General

Style	Flat
Color	Black
Screen Type	LED
Stand Type	Simple
Wall Mount	VESA 400 x 200mm
Tilt	-
Sound	Dual 10 W+10 W Speakers
Features	Voice Interaction
Connectivity	Bluetooth
SmartTV	Apps
Interface Connectors	Antenna/Cable
Operation Conditions	-
Tuner	digital
Screen Size	50 in (49.5 in)
Aspect Ratio	-
Resolution	2160p
Refresh Rate	60Hz
Viewing Angle	-
Response Time	-
Brightness	-
Contrast Ratio	-
Color Support	-
Closed Captioning	yes
Motion Enhancement	motion rate 60
HDR	yes
Battery Type	-
Power Supply	100~240Vac
Power Consumption	72 W
Depth with Stand	11.1 in
Height with Stand	28.3 in
Width with Stand	44.6 in
Net Weight with Stand	32 lbs
Depth without Stand	95 mm
Height without Stand	26.4 in
Width without Stand	44.6 in
Net Weight without Stand	30.6 lbs
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	20 watts
HDMI ARC Ports	yes
USB Ports	1
USB 2.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	1
VGA Ports	0
Remote Control	standard
3D	no