6
Loading the Media
Press the top cover open button to open the top
cover.
2. Move the paper guide lever toward the operation
panel and the paper guides outward.
NOTE:
Do not move the paper guides without unlocking
the paper guide lever. Doing this may break the
paper guide.
3. Place a media roll in the printer. Only outside
wound media is acceptable.
Adjust the paper guides to the media roll width.
5. Push back the paper guide lever to lock the paper
guides.
6. Pull the top edge of the media toward the operation
panel, and close the top cover removing slack of the
media.
NOTE:
•
Use Toshiba Tec approved media only. We are not
responsible for any print result due to the use of
other media
•
When you order media, contact the nearest
Toshiba Tec representative.
utton
ever
g
To Next Page
Loading...
Need help?
General